Foundation Waterproofing - Neoproof 360W

Substrate Preparation:

1. Ensure your surface is stable, clean, dry, and protected from rising moisture. Remove any loose materials, dust, oil, or grease. Mechanical or chemical cleaning may be needed based on the substrate. Smooth out irregularities and create an ideal surface.

Priming:

2. Before using Neoproof 360W, apply the suitable Neotex primer based on your substrate. For cementitious surfaces, options include Revinex (diluted with water), or Vinyfix Primer.

Application:

3. After priming, apply Neoproof 360W in at least two layers using a roller, brush, or airless spray. Apply the first layer then after 2 to 24 hours, depending on conditions, apply the second layer. Apply each layer in a different direction than the previous one.

4. At intersections, corners, joints, and cracks, apply Neoproof 360W in advance, reinforced with non-woven polyester fabric (Neotextile) between layers. For projects needing high mechanical resistance, fully reinforce with Neotextile.

Special Notes:

• Avoid applying Neoproof 360W in wet conditions or rainy weather.
• For applications under tiles or plaster, consider broadcasting quartz sand during the final layer to enhance adhesion.
• Increased durability is achieved by adding more layers.
• For new cement screed, create suitable joints and proper sealing. Establish expansion joints around the perimeter and transfer any existing joints from the concrete slab.

Follow these steps for effective foundation waterproofing and enjoy a dry and secure foundation!

What is Neoproof 360W used for?

• Neoproof 360W is an elastomeric waterproofing rubber coating designed for non-exposed applications on horizontal or vertical construction surfaces, providing a moisture-resistant membrane.

How should I prepare the surface before applying Neoproof 360W?

• Ensure the surface is stable, clean, dry, and protected from rising moisture. Remove loose materials, dust, oil, or grease. Smooth out irregularities for an ideal surface.

What primers are recommended for use with Neoproof 360W?

• Before applying Neoproof 360W, use a suitable Neotex primer based on your substrate. Options include Revinex (diluted with water) or Vinyfix Primer for cementitious surfaces.

What application methods can I use for Neoproof 360W?

• After priming, apply at least two layers using a roller, brush, or airless spray. Apply the first layer, and after 2 to 24 hours, apply the second layer, each in a different direction than the previous one.

How should I reinforce intersections and joints during application?

• At intersections, corners, joints, and cracks, apply Neoproof 360W in advance and reinforce with non-woven polyester fabric (Neotextile) between layers, especially for projects requiring high mechanical resistance.

Can Neoproof 360W be applied in wet conditions?

• Avoid applying in wet conditions or rainy weather. Ensure a dry environment for the best results.

Are there any special considerations for applications under tiles or plaster?

• Consider broadcasting quartz sand during the final layer to enhance adhesion for applications under tiles or plaster.

How can I achieve increased durability with Neoproof 360W?

• Increase durability by adding more layers during the application process.

What precautions should be taken for new cement screed surfaces?

• For new cement screed, create suitable joints and proper sealing. Establish expansion joints around the perimeter and transfer any existing joints from the concrete slab.

What are the environmental benefits of Neoproof 360W?

• Neoproof 360W is eco-friendly, containing no solvents or bitumen, and is user-friendly as a water-based, one-component system.