Self-Adhesive Base Sheet (Peel & Stick) - LAMABase SA

Self Adhered Base Sheet Application of LAMABase SA

• Ensure the substrate surface is primed, clean, and dry.
• Lay out the LAMABase SA roll with the release film side facing down.
• Align the sheet properly, and remove the siliconized release liner from the membrane's bottom surface.
• Apply pressure evenly to secure the membrane to the substrate.
• Overlap adjacent rolls by 100 mm at the sides and 150 mm at the ends.
• Install the cap sheet as per project specifications, ensuring a proper bond with the burn-off film on the membrane's top surface.

What is LAMABase SA used for?

• It is used as the first layer in a multi-layer roofing assembly to provide waterproofing and reinforcement.

Is LAMABase SA flexible in cold conditions?

• Yes, it offers high flexibility in cold weather due to its SBS-modified composition.

What surfaces can it be applied to?

• It can be applied to primed substrates in various roofing systems.

What is the thickness of LAMABase SA?

• It has a nominal thickness of 1.5 mm (59 mils).

How many rolls are included per pallet?

• A pallet contains 25 rolls.

Does LAMABase SA meet industry standards?

• Yes, it complies with CSA A123.23 and ASTM D6164 standards.

What is the gross coverage per roll?

• Each roll covers 20 m² (215 sq. ft).

Is LAMABase SA resistant to chemicals?

• It provides good resistance to acids, sulfates, and chlorides.

How do you install LAMABase SA?

• Lay it on a primed surface, remove the release liner, and apply pressure to secure it.

Can LAMABase SA resist fire?

• Yes, its fiberglass reinforcement provides excellent fire resistance.